13.56MHz H220-C
USB-C 13.56MHz NFC Reader for Android Phones, MIFARE UID
- USB
- Plug-in
Read range: 0–30 mm front and back, 0–10 mm from the side
The H210-U is a read-only 13.56MHz reader the size of a USB flash drive, 75 × 21 × 7 mm and about 10 g, that plugs straight into a USB-A port. It reads MIFARE Classic 1K/4K and NTAG203 UIDs at up to 80 mm and types them as 10-digit decimal numbers, also on Android through an OTG adapter.
A desk pad needs a cable and a spot on the counter. The H210-U needs only a free USB-A port, which makes it the practical choice for laptops at mobile check-in points, hot desks, event and training registration, and field staff who carry a reader in a laptop bag. It also suits thin clients and all-in-one PCs where a pad would be in the way.
Output is the same as on the H110-U and H120-U desk pads: the card UID is typed as a 10-digit decimal number into the field that has the cursor, so the same software works with both. At about 10 g, and about 40 g in its small retail box with a plastic tray, it is also light to ship to distributed sites.
Connect the stick through a USB OTG adapter (USB-A female to the phone's USB-C or micro-USB port). The phone or tablet must support USB OTG. The reader then behaves like an external keyboard: open any app, tap into a text field and present the card.
If the reader will live on a phone permanently, the H220-C plugs directly into USB-C without an adapter. The Android OTG checklist covers settings and common pitfalls. iOS is not on the H210-U's supported list.
Choose the H210-U when portability or port-side mounting matters more than a fixed reading spot. For a counter where customers lay their card down, a pad such as the H110-U gives a larger, more obvious target and keeps the reader off the PC's port.
| Model | H210-U |
|---|---|
| Frequency | 13.56 MHz |
| Form factor | USB stick reader with cap and key ring |
| Housing | ABS |
| Standard | ISO/IEC 14443A (UID read only) |
|---|---|
| Supported cards | MIFARE Classic 1K (S50), MIFARE Classic 4K (S70), NTAG203, other ISO 14443A cards (UID) |
| Read range | Up to 80 mm (depends on card and environment) |
| Read time | < 200 ms |
| Read interval | < 0.5 s |
| Interface | USB-A plug, human-input device (keyboard emulation, driver-free) |
|---|---|
| Default output | 10-digit decimal card UID (4 bytes) |
| Custom output | Custom output format on request |
| Operating systems | Windows XP, Vista, 7, 10; Linux; Android (via USB OTG adapter) |
| Dimensions | 75 × 21 × 7 mm |
|---|---|
| Weight | Approx. 10 g (approx. 40 g packed) |
| Power | 5 V DC from USB, 100 mA |
| Indicators | LED and buzzer |
| Operating temperature | -10 °C to +70 °C |
| Storage temperature | -20 °C to +80 °C |
| Humidity | < 90 % RH |
Specifications of H210-U as supplied for the standard version. Read range depends on the card or tag, mounting surface and environment — we can test your own cards before you order.
Works with
Not designed for
Card not listed? Share the card type in the inquiry form
Send card photos by email or WhatsApp. A photo can help identify markings but cannot confirm the chip or compatibility.
Remove the cap and plug the H210-U into a USB-A port, or into an OTG adapter on an Android device; no driver is needed.
Open any document or app and click or tap into a text field.
Hold the card close to the stick. The LED and buzzer confirm the read and the 10-digit UID is typed.
For a different number format, specify it in your RFQ so it is set before shipment.
Check the card protocol, host interface and output format before choosing a sample.
MIFARE Classic, Ultralight and NTAG213 compared: 4- vs 7-byte UID, 48 to 3,440 bytes of memory, security, and what a 13.56MHz UID reader can read.
Why one RFID card shows up as 0793541918, 2F4C7D1E or 076,32030: decimal, hex, byte order and Wiegand 26 formats worked through, plus a checklist.
A keyboard wedge is a reader the PC sees as a USB keyboard: it types each card number at the cursor, no driver needed. Compare HID, virtual COM and PC/SC.
Yes, through a USB OTG adapter on phones and tablets that support OTG. It types the card number into the app that has focus, like a keyboard. For a direct USB-C plug-in, see the H220-C.
iOS is not on the H210-U's supported list, so we do not offer it for iPhone or iPad.
75 × 21 × 7 mm and about 10 g, or about 40 g in its retail box. It has a cap over the USB plug and a key ring.
MIFARE Classic 1K (S50), MIFARE Classic 4K (S70), NTAG203 and other ISO 14443A cards, UID only, at up to 80 mm. For 125kHz EM4100 cards, use the L210-U.
13.56MHz H220-C
Read range: 0–30 mm front and back, 0–10 mm from the side
13.56MHz H110-U
Read range: Up to 80 mm
125kHz
13.56MHz H110-R
Read range: Up to 80 mm
Tell us your card, interface and quantity
Send the card or tag type, the host system and your volume. We reply within 1 business day with a suggested model and sample options.
We use optional Google Analytics cookies to understand site use. Google Analytics stays off unless you allow it. You can change your choice in the footer. Privacy policy